1. Latest Mobile Phone 2023
  2. All Products
  3. Huawei
  4. Huawei Mate 60 Pro

Huawei Mate 60 Pro

Huawei Mate 60 Pro
Brand: Huawei
Category: Smartphone
  • Released: 2023, August 29
  • OS: HarmonyOS 4.0 (China)
  • Display: 6.82" 1212 × 2616 pixels
  • Camera: 50MP 2160p
  • Ram: 12GB RAM Kirin 9000s
  • Battery: 5000mAh Li-Po

Device Specifications


Released 2023, August 29
Status Available


2G bands In an era of lightning-fast 5G connectivity and cutting-edge smartphone technologies, it's easy to forget the humble beginnings of mobile communication. The advent of 2G bands marked a pivotal moment in the history of mobile phones, revolutionizing how people communicate and paving the way for the interconnected world we enjoy today. In this article, we delve into the significance of 2G bands, their impact on the mobile phone industry, and their relevance in the present day. The Birth of 2G Bands: The concept of 2G (second generation) mobile networks emerged in the 1990s, replacing the archaic analog systems with digital cellular networks. This leap in technology allowed for more efficient voice and data transmission, ushering in a new era of mobile communication. 2G bands, such as GSM (Global System for Mobile Communications) and CDMA (Code Division Multiple Access), became the standard for mobile phone networks worldwide. Advantages of 2G Bands: a. Enhanced Efficiency: The digital nature of 2G networks provided improved call quality, reduced interference, and enhanced battery life. These advancements were instrumental in popularizing mobile phones and bringing them to the masses. b. Data Transmission: While the primary purpose of 2G networks was voice communication, they also laid the foundation for basic data services. Simple tasks like sending text messages and accessing WAP (Wireless Application Protocol) services became possible, albeit at slower speeds compared to modern networks. c. Global Standardization: The GSM standard, in particular, played a pivotal role in establishing a global standard for mobile communication. This allowed for seamless roaming and interoperability between different networks and mobile devices worldwide, fostering international connectivity. Evolution and the Legacy of 2G Bands: As technology progressed, subsequent generations of mobile networks, namely 3G, 4G, and now 5G, surpassed the capabilities of 2G bands. These newer networks provided faster data speeds, low latency, and support for advanced multimedia services. Consequently, many countries and network providers have decommissioned or are in the process of phasing out 2G networks to make way for more advanced technologies. Continued Relevance of 2G Bands: Despite the ongoing transition to faster networks, 2G bands still hold relevance in certain contexts: a. Legacy Devices: Many feature phones, especially in developing regions, still rely on 2G networks for basic communication. These devices offer affordable options for individuals who primarily require voice calls and basic messaging services. b. IoT (Internet of Things): A significant number of IoT devices, such as smart meters, home security systems, and industrial sensors, operate on 2G networks. The low power requirements and extensive coverage provided by 2G make it an ideal choice for these applications. c. Remote Areas: In remote and rural areas with limited infrastructure, 2G networks may be the only viable option for mobile communication due to their extended coverage capabilities. Conclusion: While 2G bands may no longer dominate the mobile phone landscape, their impact and legacy are undeniable. These networks laid the groundwork for the digital revolution and interconnected world we inhabit today. As newer generations of mobile networks continue to evolve, it's important to remember the humble origins of 2G and the significant role it played in shaping our mobile communication landscape. GSM 850 / 900 / 1800 / 1900 - SIM 1 & SIM 2
CDMA 800
3G bands In the ever-evolving world of mobile communication, each generation of technology builds upon its predecessor, pushing the boundaries of connectivity and functionality. 3G bands, the third generation of mobile networks, emerged as a game-changer, introducing a new era of high-speed data transmission and paving the way for a range of advanced mobile services. In this article, we explore the significance of 3G bands, their impact on the mobile phone industry, and the lasting influence they continue to exert in our daily lives. The Leap to 3G: The development of 3G technology emerged in the early 2000s, following the widespread adoption of 2G networks. 3G, which stands for third-generation, marked a significant shift by bringing high-speed data transmission capabilities to mobile devices. It introduced a host of technological advancements that revolutionized the way people communicate, consume media, and access the internet on their phones. Advantages of 3G Bands: a. Faster Data Transfer: One of the key advantages of 3G bands was the significant improvement in data transfer speeds compared to 2G networks. 3G networks allowed for faster web browsing, email access, and multimedia streaming, making it possible to enjoy a richer mobile experience. b. Multimedia Capabilities: With the introduction of 3G, mobile phones became multimedia powerhouses. Users could now access video calls, live TV, music streaming, and video-on-demand services directly on their devices. This shift brought about a fundamental change in the way people consumed media on the go. c. Enhanced Connectivity: 3G networks provided a more stable and reliable connection compared to their predecessors. This stability enabled users to stay connected even in areas with weaker network coverage, ensuring a more consistent communication experience. Evolution and the Transition to 4G: As technology continued to progress, 3G networks eventually made way for the fourth generation of mobile networks, commonly known as 4G. With faster speeds, lower latency, and improved efficiency, 4G networks further expanded the possibilities of mobile communication. However, even with the emergence of 4G, 3G networks continued to play a vital role in many parts of the world, particularly in areas where 4G infrastructure was still under development. The Global Impact of 3G Bands: a. Bridging the Digital Divide: 3G networks played a significant role in bridging the digital divide by providing internet access to regions that lacked wired infrastructure. In developing countries, 3G networks offered a gateway to the digital world, enabling people to access vital information, educational resources, and online services. b. Mobile Broadband Revolution: The advent of 3G opened up new opportunities for mobile broadband services, allowing users to connect their devices to the internet wherever they went. This revolutionized the way people worked, communicated, and accessed information, empowering a more mobile and flexible lifestyle. c. Legacy Devices and Backup Networks: Even as newer generations of networks emerged, 3G bands remained relevant due to the presence of legacy devices that relied on 3G connectivity. Additionally, 3G networks acted as backup networks during emergencies or network congestion scenarios, ensuring a continuous communication channel. Conclusion: The introduction of 3G bands marked a significant milestone in the history of mobile communication, bringing forth a wave of technological advancements and transforming the way we interact with our mobile devices. While 4G and now 5G networks continue to push the boundaries of connectivity, 3G networks still play a vital role in providing access to information, bridging the digital divide, and serving as a fallback option in certain scenarios. The influence HSDPA 800 / 850 / 900 / 1700(AWS) / 1900 / 2100
CDMA2000 1x
4G bands In an era driven by constant connectivity and high-speed data transfer, 4G bands have emerged as the backbone of mobile communication, revolutionizing the way we connect, communicate, and consume content on our smartphones. As the fourth generation of mobile networks, 4G has brought unprecedented speed, efficiency, and reliability to the world of mobile communication. In this article, we delve into the significance of 4G bands, their impact on the mobile phone industry, and the transformative possibilities they offer in our increasingly connected world. The Rise of 4G: 4G technology represents a significant leap forward from its predecessor, 3G, in terms of speed, capacity, and capabilities. It was introduced in the late 2000s and quickly gained traction worldwide as mobile network operators began deploying 4G infrastructure. This technology breakthrough enabled mobile devices to achieve faster download and upload speeds, reduced latency, and enhanced network stability. Advantages of 4G Bands: a. Lightning-Fast Data Transfer: The primary advantage of 4G bands lies in their ability to deliver blazingly fast data transfer speeds. With download speeds ranging from several megabits to gigabits per second, users can seamlessly stream HD videos, video conference with crystal-clear quality, and download large files in seconds. b. Enhanced Multimedia Experience: 4G networks have revolutionized the way we consume multimedia content on our mobile devices. With high-speed connectivity, users can enjoy seamless streaming of high-definition videos, music, and live broadcasts. This has driven the rise of video-on-demand services, online gaming, and immersive virtual reality experiences. c. Advanced Applications and Services: The speed and low latency offered by 4G have paved the way for a wide range of advanced applications and services. From real-time navigation and augmented reality applications to cloud-based services and Internet of Things (IoT) connectivity, 4G has unlocked new possibilities and improved efficiency across various industries. Global Impact and Accessibility: a. Bridging the Digital Divide: 4G networks have played a significant role in bridging the digital divide, bringing internet connectivity to underserved areas and regions with limited infrastructure. The accessibility and affordability of 4G-enabled devices have empowered individuals and communities by providing access to education, e-commerce, healthcare services, and government initiatives. b. Mobile Workforce and Connectivity: 4G has facilitated the growth of the mobile workforce by enabling seamless remote work and collaboration. With fast and reliable connectivity, professionals can work from anywhere, participate in virtual meetings, and access corporate resources on the go. This flexibility has transformed traditional work dynamics and increased productivity. c. Rural Connectivity and IoT Applications: 4G networks have extended connectivity to remote and rural areas, enabling IoT applications such as smart agriculture, smart grid systems, and remote monitoring. These applications have the potential to improve efficiency, reduce resource consumption, and enhance the quality of life in these regions. Future Prospects and the Transition to 5G: While 4G has transformed mobile communication, the evolution continues with the advent of 5G networks. As the fifth generation of mobile networks, 5G promises even faster speeds, ultra-low latency, and massive connectivity to support emerging technologies like autonomous vehicles, smart cities, and the Internet of Things on a larger scale. However, the widespread adoption of 5G will take time, and 4G networks will continue to play a crucial role in providing reliable connectivity during the transition. Conclusion: The emergence of 4G bands has ushered in a new era of mobile communication, revolutionizing the way we connect and interact with the digital world. With its lightning-fast data transfer speeds, enhanced multimedia capabilities, and transformative applications, 4G has empowered individuals, communities, and industries worldwide. As we embark on the journey towards 5G, it is essential to acknowledge the lasting impact and continued relevance of 4G networks in driving connectivity, bridging gaps, and creating a more connected and inclusive global society. LTE


Dimensions 163.7 x 79 x 8.1 mm (6.44 x 3.11 x 0.32 in)
Colors Black, White, Green, Purple
Weight 225 g (7.94 oz)
Build Smartphone body build refers to the physical construction and materials used in the manufacturing of smartphones. The body build plays a significant role in the overall design, durability, and feel of the device. Here are some common smartphone body build types: Metal Unibody: Smartphones with a metal unibody construction are made from a single piece of metal, usually aluminum or stainless steel. This design offers a premium look and feel, as well as robustness and structural integrity. Metal unibody smartphones often have a sleek and seamless appearance with minimal visible seams or joints. Glass and Metal Combination: Many smartphones feature a combination of glass and metal elements in their body construction. These devices typically have a metal frame for structural strength and rigidity, with glass panels on the front and/or back. Glass provides a smooth and reflective surface while allowing for wireless charging functionality in some cases. However, glass bodies may be more prone to fingerprints, smudges, and accidental drops. Plastic (Polycarbonate): Plastic, specifically polycarbonate, is a lightweight and flexible material commonly used in smartphone bodies. Plastic smartphones are often more affordable and can offer a range of colors and finishes. While they may be less premium in appearance compared to metal or glass, plastic bodies can be more resistant to impact and provide better signal reception. Ceramic: Ceramic body smartphones are less common but offer a unique look and feel. Ceramic is a durable material that provides a smooth and scratch-resistant surface. Ceramic smartphones are often more resistant to heat and have a premium aesthetic. However, they can be more prone to shattering if dropped compared to other materials. Composite or Hybrid Materials: Some smartphones incorporate composite or hybrid materials that combine elements like metal, plastic, glass, or even carbon fiber. These materials are used to achieve specific design characteristics, such as improved strength, weight reduction, or unique visual effects. It's important to note that different smartphone models and manufacturers may have variations in body build materials and design choices. The choice of body build materials can impact factors such as device weight, durability, signal reception, heat dissipation, and wireless charging compatibility. Manufacturers often aim to strike a balance between aesthetics, durability, functionality, and cost when choosing the body build materials for their smartphones. Glass front, glass back, aluminum frame
SIM Hybrid Dual SIM (Nano-SIM, dual stand-by)


Display Type Display Technology => A number of display technologies and types used in mobile phones => TFT (Thin Film Transistor), IPS (In-Place Switching), OLED (Organic Light Emitting Diode), AMOLED (Active-Matrix Organic Light-Emitting Diode), Super AMOLED (an even advanced version of AMOLED), Resistive Touchscreen (Resistive touchscreens contain two layer of conductive material with a very small gap between them which acts as a resistance), Capacitive Touchsceen (Capacitive touchscreen technology consists of a layer of glass coated with a transparent conductor) LTPO OLED capacitive touchscreen, 16M colors
Size 6.82 inches, 114.4 cm2 (~88.5% screen-to-body ratio)
Resolution 1212 x 2616 pixels, 19.5:9 ratio (~440 ppi density)
Features 120Hz
Display Protection Display Protection => Gorilla Glass is a special alkali-aluminosilicate glass shield with exceptional damage resistance that helps protect mobile displays from scratches, drops, and bumps of everyday use, It is always better to go for a smartphone with Gorilla Glass for that added protection and peace of mind. Huawei Kunlun Glass 2


Card Slot Memory Card Slot is a special slot for inserting a memory card. Memory cards allow you to expand the phone's built-in memory, A memory card (sometimes called a flash memory card or a storage card) is a small storage medium used to store data such as text, pictures, audio, and video, for use on small, portable or remote computing devices such as mobile phones, mp3 players, digital cameras. NM (Nano Memory), up to 256GB (uses shared SIM slot)
Internal Storage Internal Storage is a data storage space (flash memory) mostly used in smartphones, tablets and other electronic devices where operating system, apps, music, photos, videos, files and other user data Is stored. 256/512 GB / 1TB UFS 4


OS HarmonyOS 4.0 (China)
Chipset Chipset is a group of integrated circuits designed to perform one or a more dedicated functions, often with real time computing constraints, Popular smartphones are equipped with more advanced embedded chipsets that can do many different tasks depending on their programming. Kirin 9000S (5 nm)
CPU CPU (Central Processing Unit) mostly known as processors, CPU processes instructions in order to carry out certain functions that make your device operate properly. Processors are often described as the brain of computers, smartphones and tablets, Smartphones and tablets rely on processors to carry out their every task, Processors are an incredibly important factor in selecting any type of computing device, including your smartphone. Octa-core (1x2.62 GHz Cortex-A720 & 3x2.15 GHz Cortex-A720 & 4x1.53GHz Cortex-A510)
GPU GPU (Graphics Processing Unit) is a single-chip processor designed to rapidly manipulate and alter memory to accelerate the creation of images in a frame buffer intended for output to a display, This includes things such as lighting effects, object transformations, and 3D motion. Maleoon 910 GPU

Main Camera

Triple 50 MP, f/1.4-f/4.0, 24mm (wide), PDAF, Laser AF, OIS
48 MP, f/3.5, 90mm (periscope telephoto), PDAF, OIS, 3.5x optical zoom
12 MP, f/2.2, 13mm, 120˚ (ultrawide), PDAF
Video 4K@30/60fps, 1080p@30/60/120/240/480fps, 720p@960fps, 720p@3840fps, HDR, gyro-EIS
Features LED flash, panorama, HDR

Front Camera

Single 13 MP, f/2.4, 18mm (ultrawide)
TOF 3D, (depth/biometrics sensor)
Features HDR, panorama
Video 4K@30/60fps, 1080p@30/60/240fps


Capacity Battery Capacity is a measure (typically in Amp-hr) of the charge stored by the battery, and is determined by the mass of active material contained in the battery. The battery capacity represents the maximum amount of energy that can be extracted from the battery under certain conditions. 5000mAh Li-Po, non-removable
Charging 88W wired, 100% in 30 min (advertised)
50W wireless
20W reverse wireless


WLAN Wi-Fi 802.11 a/b/g/n/ac/6, dual-band, Wi-Fi Direct, hotspot
Bluetooth The smartphone Bluetooth system refers to the built-in Bluetooth functionality and software present in smartphones. Bluetooth is a wireless communication technology that allows devices to connect and exchange data over short distances without the need for cables. Here are some key aspects of the smartphone Bluetooth system: Bluetooth Version: Smartphones support different Bluetooth versions, such as Bluetooth 4.0, 4.2, 5.0, and so on. Each version introduces improvements in terms of data transfer speed, range, power efficiency, and features. Pairing: To establish a connection between two Bluetooth-enabled devices, they need to go through a pairing process. Pairing involves making the devices discoverable, searching for nearby devices, and entering a PIN or confirming a passkey to establish a secure connection. Profiles: Bluetooth profiles define the functions and capabilities supported by a device. Smartphones typically support various Bluetooth profiles, such as Hands-Free Profile (HFP) for phone calls, Advanced Audio Distribution Profile (A2DP) for streaming audio, and File Transfer Profile (FTP) for sharing files. Connection Range: The effective range of Bluetooth connectivity can vary depending on the Bluetooth version and external factors like obstacles and interference. Typically, Bluetooth has an indoor range of up to 30 feet (10 meters) or more in ideal conditions. Battery Efficiency: Bluetooth technology has evolved to be more power-efficient in newer versions. Bluetooth Low Energy (LE) introduced in Bluetooth 4.0 and later versions enables devices to maintain a connection with minimal power consumption, making it suitable for applications like fitness trackers and smartwatches. Audio and Data Transfer: The smartphone Bluetooth system enables wireless audio streaming to Bluetooth headphones, speakers, or car audio systems. It also supports data transfer between smartphones and other Bluetooth-enabled devices like laptops, tablets, and smart home devices. Bluetooth Settings: Smartphones have dedicated settings menus for Bluetooth, allowing users to manage paired devices, enable or disable Bluetooth, adjust visibility settings, and control other Bluetooth-related preferences. Bluetooth Security: Bluetooth connections employ various security measures, including encryption and authentication, to ensure secure communication between devices and protect against unauthorized access. It's important to note that different smartphone models and manufacturers may have variations in the Bluetooth features and settings offered. The Bluetooth capabilities and user interface may differ based on the smartphone's operating system, such as Android or iOS. The smartphone Bluetooth system plays a crucial role in facilitating wireless connectivity, enabling users to connect and interact with a wide range of Bluetooth-enabled devices and accessories for enhanced functionality and convenience. 5.2, A2DP, LE
GPS GPS The Global Positioning System is a satellite-based radio navigation system, GPS permits users to determine their position, velocity and the time 24 hours a day, in all weather, anywhere in the world, In order to locate your position, your device or GPS receiver must have a clear view of the sky. GPS (L1+L5), GLONASS (L1), BDS (B1I+B1c+B2a+B2b), GALILEO (E1+E5a+E5b), QZSS (L1+L5), NavIC (L5)
NFC NFC (Near field communication) is a set of standards for smartphones and similar devices to establish peer-to-peer radio communications with each other by touching them together or bringing them into proximity, usually no more than a few inches. Yes
FM Radio No
Infrared Infrared The world is becoming more and more reliant on technology, and one of the most exciting and innovative forms of technology is infrared technology. Infrared technology is able to capture light, heat, and other signals that are invisible to the naked eye, and can be used in a variety of applicat Infrared technology can be used in many different ways. It has been used to detect heat sources in infrared cameras and to help detect damage in buildings. It can also be used to create images of objects that are invisible to the naked eye. Additionally, it can be used to control remote devices, measure temperature, and provide an extra layer of security in buildings and homes. Furthermore, it can be used to help in medical diagnostics, such as thermography and thermometry. Finally, infrared technology is used in robotics and drones to provide navigation. With its many applications, it is clear that infrared technology is an important tool that can be used in many different fields. ions from medical imaging to security. In this blog post, we'll explore the basics of infrared technology and discuss how it is being used in a variety of fields. Yes
USB USB Type-C 3.1, OTG, Display Port 1.2


Loudspeaker Yes, with stereo speakers
3.5mm jack No


Sensors Sensors are electronic components that detects and responds to some type of input from the physical environment. The specific input could be light, heat, motion, moisture, pressure and location, The output is generally a signal that is converted to use in computing systems, a location sensor, such as a GPS receiver is able to detect current location of your electronic device. Face ID, fingerprint (under display, optical), accelerometer, gyro, proximity, barometer, compass, color spectrum
BDS Satellite Calling and Message

Huawei Mate 60 Pro Full Specification & Price in Bangladesh

The Huawei Mate 60 Pro is now available in three variants (12GB RAM & 256/512GB/1TB ROM). Now, its Price is 1,10,000 taka in Bangladesh & has a 5000mAh battery with fast charging 88W. The device runs on HarmonyOS 4.0 and is powered by the Kirin 9000S (5 nm) chipset.

Huawei Mate 60 Pro price in bd

Model : Huawei Mate 60 Pro
Price : BDT. 1,10,000
Display : 6.82″ 1212 × 2616 pixels
RAM : 12 GB
ROM : 256/512 GB / 1TB
Released : 2023, August 29

Huawei Mate 60 Pro spotlight

Unveiling the Future: Huawei Mate 60 Pro

Huawei Mate 60 Pro


In the fast-paced world of smartphones, Huawei has consistently been a front-runner when it comes to innovation and cutting-edge technology. With the release of the Huawei Mate 60 Pro, the company continues its tradition of pushing boundaries and redefining what a premium smartphone can be. This latest addition to the Mate series boasts impressive features, stunning design, and powerful performance, making it a device worth exploring.

Design and Display

The Huawei Mate 60 Pro’s design is a true testament to the company’s commitment to excellence in craftsmanship. It features a sleek and premium build, with a glass back that curves gracefully into the metal frame, giving it a comfortable and luxurious feel in hand. The choice of materials and meticulous attention to detail is evident in every aspect of the design.

The smartphone sports a generous 6.7-inch OLED display with a resolution of 1080 x 2340 pixels. While some may argue that a higher resolution display would have been ideal for a flagship device, the Mate 60 Pro makes up for it with vibrant colors, deep blacks, and an adaptive refresh rate that can range from 60Hz to 120Hz, ensuring smooth scrolling and fluid animations.


Under the hood, the Huawei Mate 60 Pro is a powerhouse. It is powered by the latest and greatest processor from Huawei’s own HiSilicon Kirin series, ensuring lightning-fast performance and seamless multitasking. The combination of ample RAM and storage options ensures that users can run resource-intensive apps and store their precious memories without a hitch.

One of the standout features is its 5G capability, making it future-proof for the ever-expanding 5G networks around the world. This ensures lightning-fast download and upload speeds, low latency, and improved overall connectivity, all of which are becoming increasingly important in our hyperconnected world.

Camera System

Huawei has always been a pioneer in smartphone photography, and the Mate 60 Pro is no exception. The device boasts a versatile camera system that is sure to delight photography enthusiasts. On the rear, you’ll find a triple-camera setup consisting of a 50-megapixel primary sensor, a 12-megapixel ultra-wide-angle lens, and a 10-megapixel telephoto lens with optical zoom capabilities. This setup ensures stunning, detailed, and vibrant photos in various conditions, from well-lit landscapes to low-light scenarios.

Huawei Mate 60 Pro

For selfie aficionados, the Mate 60 Pro offers a 32-megapixel front-facing camera, which produces crisp and clear self-portraits with natural skin tones. Huawei’s AI photography features, including scene recognition and night mode, further enhance the camera’s capabilities, making it a reliable tool for capturing memories.

Software and Ecosystem

The Huawei Mate 60 Pro runs on Huawei’s EMUI 11, which is based on the Android 11 operating system. While the lack of Google services may deter some users, Huawei has made significant strides in building its ecosystem with the Huawei AppGallery and the Huawei Mobile Services (HMS) platform. Many popular apps are available through these services, and the AppGallery continues to grow with new additions regularly.

Battery Life and Charging

With a 4,800mAh battery, the Huawei Mate 60 Pro offers impressive battery life, easily lasting a full day of heavy usage. It also supports fast charging, wireless charging, and reverse wireless charging, ensuring that you can quickly replenish the battery no matter where you are.


The device features an in-display fingerprint sensor for biometric authentication, which adds an extra layer of security for users. Huawei has also incorporated robust security measures at the software level, ensuring that your data remains safe and private.

Positive Statements

Outstanding Camera System: The Huawei Mate 60 Pro boasts an exceptional camera system, comprising a versatile quad-camera setup, with a primary 108MP sensor. This device delivers stunning photography, capturing intricate details and vivid colors even in challenging lighting conditions. The phone is ideal for photography enthusiasts and those who want to take their smartphone photography to the next level.

Huawei Mate 60 Pro

Impressive Display: The device sports a gorgeous OLED display with a high resolution and vibrant colors. The 6.7-inch curved screen provides an immersive viewing experience, making it perfect for multimedia consumption and gaming.

Exceptional Performance: Powered by the latest and most powerful Kirin chipset, the Mate 60 Pro offers top-notch performance. Multitasking, gaming, and demanding applications run seamlessly, thanks to the ample RAM and processing power.

Ample Battery Life: The device features a substantial battery capacity that ensures all-day usage without frequent recharging. Fast charging and wireless charging capabilities further enhance the convenience of powering up your device.

Sleek and Premium Design: Huawei has always excelled in terms of design, and the Mate 60 Pro is no exception. Its sleek and premium build, combined with the curvature of the screen, gives it a sophisticated and comfortable feel in hand.

Negative Statements

Lack of Google Services: One of the most significant drawbacks of the Mate 60 Pro is the absence of Google services and apps due to the ongoing trade restrictions between Huawei and the U.S. government. While Huawei has developed its own app ecosystem, it still lacks the comprehensive app selection and integration that Google provides, which may be a deal-breaker for some users.

Limited Availability: The Mate 60 Pro may not be readily available in some regions due to the aforementioned trade restrictions. This can be frustrating for potential buyers who are unable to purchase the device or access necessary support and services.

Expensive Price Tag: The Mate 60 Pro falls into the premium smartphone category, and its price reflects that. While it offers cutting-edge features, the high cost may deter budget-conscious consumers.

Software Update Concerns: With the uncertainty surrounding Huawei’s ability to provide timely and consistent software updates, some users may be concerned about the longevity and future performance of the Mate 60 Pro.

Controversial Privacy Concerns: Huawei’s previous controversies related to security and privacy concerns persist, which may make some users hesitant to trust the brand with their personal data.


The Huawei Mate 60 Pro is undeniably a powerhouse of a smartphone, featuring a remarkable camera system, impressive display, and top-tier performance. However, it comes with significant drawbacks, primarily the absence of Google services, limited availability, and a high price tag. Whether the Mate 60 Pro is the right choice for you depends on your priorities and your willingness to navigate the challenges posed by the ongoing Huawei-related controversies.

YouTube player

What are the key features of the Huawei Mate 60 Pro?

Huawei Mate 60 Pro

The Huawei Mate 60 Pro boasts a range of impressive features, including:
A high-resolution OLED display with curved edges for a stunning visual experience.
Huawei’s powerful Kirin processor for smooth and efficient performance.
A versatile quad-camera setup designed for exceptional photography and videography.
5G connectivity for ultra-fast internet speeds.
A large battery with fast charging capabilities for all-day usage.
HarmonyOS 2.0, Huawei’s proprietary operating system.

How is the camera performance on the Mate 60 Pro?

Huawei Mate 60 Pro

The Mate 60 Pro features a quad-camera system that includes a primary 108MP sensor, an ultra-wide-angle lens, a periscope telephoto lens, and a depth sensor. This setup allows for excellent versatility in photography and videography, capturing stunning shots in various lighting conditions. The high-resolution sensor excels in detail capture, while the periscope telephoto lens enables impressive zoom capabilities. Huawei’s advanced AI processing enhances image quality and offers a wide range of photography modes and features.

Is the Huawei Mate 60 Pro 5G capable?

Huawei Mate 60 Pro

Yes, the Huawei Mate 60 Pro supports 5G connectivity. This means you can experience incredibly fast download and upload speeds, reduced latency, and an overall improved internet experience when connected to a 5G network. It’s worth noting that the availability of 5G depends on your location and your carrier’s network infrastructure.

How does HarmonyOS 2.0 compare to Android?

Huawei Mate 60 Pro

HarmonyOS 2.0 is Huawei’s attempt to create a more unified ecosystem across its various devices, including smartphones, tablets, and smart TVs. It shares some similarities with Android, as it is built on open-source AOSP (Android Open Source Project) code. However, HarmonyOS offers a more integrated and cross-device experience, allowing for seamless connectivity and multitasking between Huawei devices. It also includes a wide range of apps available through the Huawei AppGallery.

What about app availability?

Huawei Mate 60 Pro

One of the concerns for Huawei users has been access to popular apps due to the absence of Google services. While Huawei has been working hard to expand its AppGallery and encourage app developers to create apps for their platform, some popular apps and services may still be missing. Users can utilize alternatives or sideload apps if they are not available in the AppGallery, but this may come with certain risks.

Does the Mate 60 Pro have Google services?

Huawei Mate 60 Pro

Due to ongoing trade restrictions, Huawei devices, including the Mate 60 Pro, do not come with Google Mobile Services (GMS), which includes apps like Gmail, Google Maps, and the Google Play Store. Instead, they rely on Huawei’s AppGallery and services like Huawei Mobile Services (HMS). While you can find many apps on the AppGallery, some users might miss certain Google services and apps.

What is the battery life like on the Mate 60 Pro?

Huawei Mate 60 Pro

The Mate 60 Pro is equipped with a substantial battery to support its powerful hardware. The exact battery life can vary depending on your usage patterns, but it generally offers all-day battery life with moderate usage. It also supports fast charging, allowing you to quickly replenish the battery when needed.


  • Be the first to add a Review

    Please post a user review only if you have / had this product.

  • Rate this Product

  • What do you feel about Design and build quality of this device?
  • Screen size, image quality (brightness, colors, contrast, etc), visibility in sun light, angles of view and touchscreen.
  • Usability of Camera interface, image and video quality in different light conditions and environment.
  • Bluetooth, Wi-fi connectivity, data trnasfer speed, internet browsing and interfaces.
  • When you call someone, what is the voice quality you hear or vice versa, is speakerproduct working good during calls.
  • Is this device perform good while watching videos, playing games, taking snapshots, browsing internet and navigate through other applications?
  • What about battery life, while calling, listening music, watching videos, playing games and doing other tasks.
  • 6 / 10 based on your selection

Phone BrandsView All

Show More Brands

News & Reviews

Phone BrandsView All

Show More Brands